Pulsetech 390PT 6V and 12V Battery Tester (741X390) Manual de usuario descargar pdf (Pagina 2)

800-580-75542

Test Procedures / Operating Instructions

IMPORTANT:

1. For testing 6 and 12 volt batteries, and for testing 12 and 24 volt charging systems.

2. Suggested range of operation 32ºF (0ºC) to 122ºF (50ºC) in ambient temperature.

WARNING:

1. Working in the vicinity of a lead acid battery is dangerous. Batteries generate explosive

gases during normal battery operation. For this reason, it is of utmost importance, if you

have any doubt, that each time before using your tester, you read these instructions very

carefully.

2. To reduce risk of battery explosion, follow these instructions and those published by the

battery manufacturer and manufacturer of any equipment you intend to use in the vicin-

ity of the battery. Observe cautionary markings on these items.

3. Do not expose the tester to rain or snow.

Personal Safety Precautions

1. Someone should be within range of your voice or close enough to come to your aid when

you work near a lead acid battery.

2. Have plenty of fresh water and soap nearby in case battery acid contacts skin, clothing

or eyes.

3. Wear safety glasses and protective clothing.

LEGEND

1. LCD Display

2. UP/DOWN Button

3. ENTER: function selection/

conﬁrm choice

4. Positive Clamp (RED, +)

5. Negative Clamp (BLACK, -)

1 2 3 4 5 6 7 8 9

Sin comentarios

Pulsetech 390PT 6V and 12V Battery Tester (741X390) Manual de usuario Pagina 2